Hey there! This post contains affiliate links to products. We may receive a commission for purchases made through these links. But it never influences our product selection process.

The performance of your KIA car is directly linked to the alternator’s performance. It ensures proper supply to battery and electrical components. However, over time, you may need its replacement. How do I deal with the 2010 KIA Forte alternator replacement process?

Alternator replacement is a simple process, but first, clear the path to access the alternator. Remove the tensioner belt, disconnect the battery, and remove other components that restrict access. Once you are able to remove the alternator, gently pull it out and install the new one. After that, reinstall every item properly and take it for a test drive.

You may have many questions regarding alternator replacement. Let’s follow me to get the answers to your questions to complement the alternator replacement process easily and perfectly.

Symptoms Of A Failing Alternator

A Failing Alternator
A mechanic holding a damaged alternator, showcasing symptoms of a failing alternator in need of replacement.

If your car’s alternator is faulty, you may experience the following symptoms. 

  • Dim lights are a common symptom of a faulty alternator. You will see that your headlights or interior lights will illuminate dimmer than usual.
  • You may also experience warning lights on the battery or alternator to tell you about issues in the charging system.
  • Due to low power supply, you may face problems with power windows or infotainment systems.
  • A frequent drain is also a sign of a problem in your alternator
  • Engine stalling can occur due to alternator failure

If your KIA P1326 glow relay is stuck in the “ON” position, first read this blog to solve the issue properly: KIA p1326 glow relay stuck on.

What Causes Kia Forte Alternator Problems?

KIA forte alternator ensures excellent performance. However, over time, certain problems can impact its performance. There are many reasons, but here I have listed the top reasons that may cause alternator issues.

  • An old alternator may eventually experience internal component wear out. It can decrease the alternator’s efficiency and output.
  • The alternator belt should be tight, but it may affect the alternator’s performance if it is too tight or loose.
  • The voltage regulators can be the culprits for alternator problems; they may result in inconsistent power supply to the battery or other electrical components.
  • Loose or corroded connectors can make alternator efficiency poor by disrupting the power supply to the battery.
  • Failed diodes may result in a drained battery, diminished alternator performance, and a disruption in the battery’s power supply.
  • When you install high-power aftermarket accessories, like audio systems, the alternator can become overworked and perform poorly.

2010 Kia Forte Alternator Replacement [Step-by-Step Guide] 

2010 kia forte alternator replacement
A skilled mechanic performing a 2010 Kia Forte alternator replacement, ensuring optimal performance and electrical reliability.

Replacing the 2010 Kia Forte alternator can be easier if you correctly follow the steps below.

Step 1: Removing Belt Tensioner

  • Locate the idler and tensioner pulleys before removing the belt tensioner. Pulleys are usually located near the front of the engine.
  • Then, take a 17mm wrench and release the tension on the belt
  • Now gently push the tensioner forward and slide the belt off the pulleys with the other hand

Step 2: Disconnecting Battery

Disconnecting Battery
A mechanic carefully disconnects the battery of a Kia Forte, an essential step for various automotive maintenance and repair tasks.
  • For safe operation, disconnect the battery
  • First, remove the negative terminal and then remove the positive terminal
  • Once removed, check the wires or connector current using a multimeter to ensure no power is being output. I recommend the Klein Tools MM325 Multimeter for accurate performance.

Step 3: Remove Air Duct

  • After that, remove the air duct.
  • Take a screwdriver and loosen the bolts to remove the air duct.
  • Once you remove the air duct, you will have enough space to access the alternator.

Step 4: Clearing a Path

  • It is better to clear the path and remove the hose, radiator fan, or other items that may hinder accessing the alternator.
  • I recommend you detach the radiator fan for easy workspace.

Step 5: Disconnecting Components

  • You also need to remove the connectors that are connected to the alternator. Push and pull the connectors gently.
  • It is also good if you remove the hose near the radiator.

Step 6: Loosening Alternator Bolts

  • Now, use a long wrench and loosen the alternator side bolts.
  • Once the bolts are removed, loosen and remove the top bolts.
  • Locate the upper and lower 14mm bolts securing the alternator.
  • Next, you will need to remove the bottom bolts.

Step 7: Remove The Alternator

  • It is almost free once you have removed all the bolts securing the alternator. 
  • Remove it with a gentle push and pull.

Step 8: Install The New Alternator

Install a new Alternator
A mechanic expertly installs a brand-new alternator in a well-equipped garage, ensuring top-notch automotive service and reliability.

Install the new alternator in a similar place and secure it by applying the bolts from the sides, top, and bottom. Make sure there are no loose bolts. For alternators, try to replace them with the recommended one in the manual. 

However, I recommend A-Premium Alternator for your 2010 KIA Forte for better performance.

Step 9: Reinstallation

Now reverse the installation process and put all items one by one back

Once done, check all items and ensure they are properly mounted and there are no loose parts.

Step 10: Test 

Finally, you need to ensure you have completed the job perfectly. Check the battery level with a multimeter and start your vehicle for a 1-hour drive. During the drive, check the lights to ensure they are okay. When switched off, the vehicle rechecks the battery’s voltage and ensures it is properly charged. If it is okay, you have done it well. 

If you are buying a Kia car, you must read this article to save thousands of dollars: KIA dealers not charging over MSRP

2010 Kia Forte Alternator Replacement Cost:

There is no exact answer to that question; however, an average cost can be between $300 and $600. It includes the cost of parts and labor. But remember factors such as location, part brand, and labor cost variations. If you prefer high quality regarding replacement parts and labor, it may increase to $1,000.

Is your KIA display screen faulty? Visit this link to fix it yourself: KIA display screen not working.

Frequently Asked Questions (FAQs):

What is the Kia Forte alternator price?

The price of a 2010 KIA forte alternator can vary depending on your location and the brand you choose. However, a good quality Forte alternator may cost you between 150 and 200 dollars.

Is the KIA Forte alternator replacement process the same for all models?

No, it is not the same for all models. However, KIA models from 2008 to 2013 have a similar setup for alternators. So, you can replace the alternator similarly for these models.

Is it good if I replace the alternator?

Yes, it is a simple job if you have some mechanical skills and follow the instructions properly. However, if you need more confidence in your skills, then it is better to seek professional assistance to avoid loss.

Can I use any alternator on the KIA Forte model 2010?

No, you cannot use any of the alternators on the KIA Forte. It needs a specific style and size, so when choosing an alternator for replacement, follow the manual strictly and ensure you choose the right one. 


The KIA Forte 2010 is an excellent model; however, you may experience unwanted performance over time due to its faulty alternator. It will need repair or replacement to ensure proper functioning. The replacement of alternators is a long process. 

However, if you follow the instructions strictly, it is an easy process. You save hundreds of dollars on labor costs. Ensure all electrical functions are working properly and the alternator is installed correctly before replacing it.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *