Hey there! This post contains affiliate links to products. We may receive a commission for purchases made through these links. But it never influences our product selection process.

Hey there, fellow Ford F150 owner! We all know how awesome these trucks are. But sometimes even the best vehicles encounter issues. Don’t be worried if your Ford F-150 won’t start and makes no clicking sound. It can be fixed, if you understand the cause of that problem. But a question comes to my mind, how to identify the cause and then fix it?

First, check the battery connections and voltage. If the battery is dead, replace it with a new 12V battery. Then check the ignition switch; if it is faulty, replace it. For a faulty starter motor, clean it or replace it. A clogged fuel filter may require replacement. A defective spark plug should be cleaned or replaced.

However, for a quick solution, you need proper guidelines. No worries, I am here to help you. Simply stay here to discover the causes I found, how I solved them, and more. Let’s get started.

Common Causes of a Ford F150 Not Starting Without Clicking Noise

Your Ford f150 truck may not start without clicking noise for multiple reasons. But a question comes to everyone’s mind: where to start? Here I am sharing the 5 most occurring causes reported by Ford f150 owners for that problem. I hope you will solve the problem if you check for these problems.

  • Dead Battery
  • Faulty Ignition Switch
  • Faulty Starter Motor
  • Clogged Fuel Filter
  • Defective Spark Plug

Uh; can not input instructions on your Ford Touch screen? Read here: Ford touch screen not responding to touch.

Ford F150 Wont Start No Clicking Noise: Problems & Solutions

Ford F150 Wont Start No Clicking Noise
Ford F150 Won’t Start No Clicking Noise

Problem 1: Dead Battery

A Ford F150 may be unable to start without making a clicking noise if its battery is dead. When the battery has no power, it fails to provide the necessary electrical current to activate the starter motor. In the end, there won’t be any energy left over to turn on the engine. So you may not be able to start the vehicle.


  • First, check the battery connections and make sure they are tight enough.
  • Now take a digital multimeter and check the voltage. You can use any of the available digital multimeters, but for accurate results, I recommend Klein Tools MM400 Multimeter.
  • Connect the battery to the multimeter and check the readings; it should be 12 volts. If it is below, plug in the battery with the power source and allow it to recharge for 30 minutes.
  • Recheck the voltage; if it is still low, you have a dead battery.
  • Find a suitable 12V battery; my recommendation is Odyssey PC925MJT Automotive and LTV Battery.
  • Once replaced, recharge the new battery and start your vehicle to ensure the battery is working fine.

Problem 2: Faulty Ignition Switch

Faulty Ignition Switch

The ignition switch in a Ford F150 is responsible for engaging the starter motor. If the ignition switch fails to engage the starter motor, it prevents the engine from receiving the necessary electrical signals to start the ignition process. 


Remove the ignition key and check for visible damage to the ignition switch.

Unscrew the switch and check its assembly. If the assembly is damaged, replace it with a new one. I recommend you Standard Motor Products US70LT Ignition Starter Switch. It is easy to install and perform well.

After installing the new ignition switch, test it at least five times to make sure it functions properly.

Problem 3: Faulty Starter Motor

Faulty Starter Motor

The starter motor is responsible for initiating the engine’s ignition. If the starter motor fails to engage or rotate, it prevents the engine from starting up. A faulty starter motor won’t start the vehicle and won’t produce a clicking noise. 


  • Open the car bonnet and look for the starter motor in the engine compartment.
  • Once you have found the starter motor, unscrew it and clean it.
  • If needed, clean it with oil and ensure no dust particles, because it can jam due to dust.
  • Test the motor by connecting it to a 12V battery.
  • If it is still not responding, you will need a new starter motor. Take a new motor and install it in the old motor’s place. Make sure the terminals are connected correctly before you complete the connection.
  • After connecting it, test it multiple times and ensure it is fine.

Problem 4: Clogged Fuel Filter

The fuel filter obstructs the flow of fuel to the engine. A clogged fuel filter causes fuel starvation and prevents the engine from starting. So, you may be unable to start your vehicle, even if you have fuel.


  • Locate the fuel filter under the vehicle, in Ford f150 it is near the fuel tank.
  • Relieve fuel pressure by disconnecting the fuel pump fuse or relay and starting the engine until it stalls.
  • Use a wrench to disconnect the fuel lines from the filter, placing a catch basin to collect fuel.
  • Remove the old filter and replace it with a new one, ensuring proper orientation.
  • Reconnect the fuel lines, making sure they are secure and tight.
  • Reinstall the fuel pump fuse.
  • Start the vehicle and ensure the fuel filter is working fine.

You may also like: If your ford ranger brake lights are not working then you can see this article. Here is its simple solution.

Problem 5: Defective Spark Plug

Defective Spark Plug

The spark plug is responsible for generating the necessary spark to ignite the fuel-air mixture. If the spark plug is faulty, it will not ignite the fuel. It hinders the combustion process and prevents the engine from starting.


  • Switch off the ignition and disconnect the battery.
  • Locate the spark plugs and remove the defective ones using a socket.
  • Inspect the spark plug for signs of damage or fouling.
  • If necessary, clean or replace the spark plug. If you are replacing my recommendation is Autolite Iridium XP Automotive Replacement Spark Plugs.
  • Reinstall the spark plug, ensuring it is properly tightened.
  • Reconnect the battery and try starting the Ford F-150 and ensure it is okay.

Why Is My Ford F150 Not Starting Battery Good?

If your Ford F150 won’t start despite having a good battery, there may be other issues causing the problem. Consider checking the starter motor, ignition switch, fuel system, or electrical connections for any faults. It’s also worth checking the fuses and relays related to the starting system.


  • First, check and verify the battery is okay and fully charged.
  • Then check the starter motor it should be fine, if needed replace it.
  • Next, inspect the ignition switch, and replace the ignition switch if damaged.
  • Verify that the fuel system is working properly, such as fuel pump, filter, and injectors. Do repair or replacement of the parts as needed.
  • Ensure that all electrical connections related to the starting system are secure and free from corrosion.
  • Check the fuses and relays associated with the starting system for any blown fuses or faulty relays.

It may also help you start your Ford truck: Ford remote start not working 1 beep.

Ford F150 Won’t Start No Power: Common Causes and Solutions 

Possible reasons for a Ford F150 not starting and having no power could be:

  • A dead battery
  • Faulty alternator
  • Loose or corroded connections
  • A blown fuse
  • A malfunctioning starter


  • First, make sure the battery is in good condition; if not, replace it.
  • Then check for the alternator, it should be found to supply power. Replace it if damaged.
  • Check the wiring and connections, and ensure all are tight (if loose tighten them).
  • Also, check for the fuse and ensure it is okay. You must replace the blown fuse. 
  • Finally, check for a starter, if it is faulty replace it.

When To Seek Professional Help?

Dustin Hall
I’m Dustin Hall — A licensed automotive engineer and passionate about the automotive (Car, Truck, RV, Jeep).

The majority of the reasons why a Ford F150 won’t start without making a clicking noise are straightforward and easy to fix. 

However, if you have checked the battery, solenoid switch, connections, starter motor, ignition switch, and electrical connections but problems exist, then call the professional guy. 

Do not waste your time because you may be missing something or doing something wrong. Only a professional can handle complex issues.

Frequently Asked Questions (FAQs):

Why is my ford f150 turning over but not starting?

Possible reasons for a Ford F150 cranking but not starting to include dirty fuel injectors, which can become clogged with rust, corrosion, or debris over time, leading to a lack of fuel reaching the engine.

Why is my Ford F150 making a clicking noise?

There are several reasons for that issue. However, some possible causes for a Ford F-150 engine making a clicking noise can be a low oil level or pressure, ignition system problems, or an exhaust leak.

How much is it to fix Ford f150 wont start, no sound?

The cost to fix a Ford F150 that won’t start and has no sound can range from $10 to $400, depending on the specific issue causing the problem.

Why does my Ford f150 truck crank before starting?

Your Ford F150 truck may crank for a long time before starting due to issues with the spark or fuel. This can be caused by a disrupted air/fuel mixture, resulting in either too much air or not enough fuel.


Ford is considered one of the most trusted vehicles on the market. But fixing the Ford F150 clicking noise issue is quite easy. It happens due to four to five common causes. So, if you check for the above problems and identify the issue, you can fix it.

However, it is not a piece of cake to try for everyone. You must ensure that you have learned it; otherwise, seek professional services to prevent further damage.

Happy Driving!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *