Hey there! This post contains affiliate links to products. We may receive a commission for purchases made through these links. But it never influences our product selection process.

Having a functional backup camera is a must for safe driving and maneuvering. Its significance grows if you drive a big car like an F150. When your f150 backup camera breaks down, it can be annoying and inconvenient. You need immediate action to solve the issue. But how do you fix an f150 backup camera not working? 

Before delving into the solution, ensure your camera has the problem. Check for signs such as “no signal” or no view on the screen. If you find the issue, go for the identification of the causes of the problem. The F150 backup camera may only work for a few reasons, such as a blown fuse, a misaligned shifter, or damaged camera components. You must check for such issues to quickly solve the F150 backup camera problems.  

Let’s join me and learn to troubleshoot the faulty F150 backup camera to safely get back on the road.

Possible Reasons Why F150 Backup Camera is Not Working

There are many reasons for a faulty F150 backup camera. The list can be long, but here I have listed the 3 most possible reasons for that problem:

  • Blown fuse
  • Misaligned shifter
  • Faulty camera or its components

What Signs When You Have A Problem With F150 Backup Camera?

Before going into the category-wise details of the problems and their solutions, let us better talk about the visible disorders of the camera. They tell you that something is wrong with the device.

  • No Signal Sign: While going reverse, your rearview camera screen says no signal or no rearview camera detected.
  • Blue Screen: In other cases, you might find a blank blue screen in place of the back view video.  

Having trouble with your Honda Lane Watch camera? Find solutions and troubleshooting tips for fixing issues with your Lane Watch camera functionality.

F150 Backup Camera Not Working [Problems and Solution]

f150 backup camera not working
The faulty backup camera in F150 hinders rear visibility and poses a safety concern for the driver.

Among the multiple reasons for the not working camera, the common ones need to be discussed in the beginning:

Problem 1: Blown fuse

A short or blown fuse could be a problem for the backup camera. In the case of the blown fuse, it is the problem of the fuse box of the camera. But, if the light turns off when the backup camera fuse is removed, it is short. 

In that case, things get more complicated. The short may not be limited to the backup camera. It could reach up to the truck’s battery as well. So watch out and take care of the shorts, even on the backup camera. 


If it is a blown fuse, look for the fusebox of the backup camera and replace it. You would most likely get rid of the problem.

If it is short, you need to perform a circuit light test. 

  1. Disconnect the negative terminal from the truck’s battery. 
  2. Connect one end of the test circuit to the disconnected terminal.
  3. Remove one fuse from the fuse box at a time and wait for the short indicator light to turn off.
  4. If the light turns off, it is short in that area.

The tricky part is finding the short area in the fuse box to see the exposed wires. All you would need after finding the wires would be to insulate them. 

Problem 2: Misaligned shifter

Sometimes, the backup camera is not working due to the misaligned shifter. It is when the truck doesn’t tell the cameras that you are in reverse. It happens when the gear indicator light on the truck’s dash is not giving the signal. 


  • Switch off your f150 truck and remove the key from the ignition switch.
  • Then locate the shifter cable adjustment nut. It is available near the base of the shifter.
  • Now, take a wrench or pliers and loosen the adjustment nut.
  • Next, move the shifter into the “Reverse” position and hold it there.
  • While holding the shifter in “Reverse”.
  • Tighten the adjustment nut until it is snug.
  • Release the shifter and verify that it returns to the proper position for “Park.”
  • Start the engine and check if the backup camera is now working.

F150 Backup Camera Stays On

There are a variety of causes for this, all of which may result in the backup camera remaining on:


There are various probabilities:

  • Faulty wiring or connections can cause the camera to stay on all the time. There might be a loose wire inside.
  • Software glitches can be one reason because the newer machines depend more on firmware or software, so a problem in the software could keep the backup camera on.
  • The control module responsible for switching on and off the camera can have a defect.
  • This can also occur due to heavy-duty activity with your f150 and the camera wiring being hit or damaged.


The solutions, of course, are hidden in the problems. It means that if you identify the problem, you can easily find the solution. The wiring can be settled by looking for loose wires. 

You can check for a bad camera switch or a bad control module. For the software glitch, look for the software update to master reset.  

Why Does My Backup Camera Not Beep?

Why Does My Backup Camera Not Beep
The silent backup camera perplexes the driver, leaving them wondering why it fails to emit any beeping sound.

The backup camera may be working fine, but sometimes it occurs that there is no beeping sound heard while backing up:

  • It could be possible that your f150 has a camera version without a beeping sound.
  • The camera settings might have a disabling feature for the beeping sound that is activated.
  • The speaker attached to the backup camera either has the wrong wiring or is not working properly.


  • Check out the camera version: Ensure that your F150’s camera version supports the beeping sound. Some versions may not have this feature.
  • Camera settings: Access the camera settings and ensure the beeping sound is not disabled. If it is disabled, enable it.
  • Wiring and speaker: Inspect the wiring connecting the speaker to the backup camera. Ensure wires are correctly connected and not damaged. If necessary, replace the speaker if it is not working correctly. I recommend the f150 Backup Camera for your vehicle. It is compatible with all Ford models and many other brands.

F-150 Backup Camera Replacement

While talking about the camera replacement, I would first recommend that you buy the Dorman 590-421 Rear Park Assist Camera for your f150. It is cheaper, almost half of what the market price is. 

Now, talking about the replacement manual, I would let you go through simple but thorough steps to do the setting right:

  • Remove the logo hardcover from the back.
  • Behind it, you will find the inner mechanism with a screw to be opened with your 7 mm screwdriver. 
  • Removing the second covering will let you see the hole with the backup camera and 125 mm screws. Unwind them
  •  Now remove the clip by pushing it hard and you will have a small camera detached
  •  Now place the new camera in.
  • Screw back all the parts the same way you screwed them out. 
  • Now switch in the truck and check for the backup camera screen. Ensure the camera is working fine.

However, if you are still confused, here is a video to get a clear idea of how to place the camera appropriately.

How To Reset Backup Camera On Ford F150

In some cases, the camera’s software is the only problem, and a factory reset will fix it. When you get a NO Signal Sign on the blue screen, the following problems can be behind it:

  • Loose electrical component
  • A glitch 

In that case, you need to go through a 3-6 minute process. All you need to do is press the button in the center of the dashboard that says reset. Your camera will reset to factory settings if you hold down the button for 10 to 20 seconds.

F150 Backup Camera Software Update: 

That sounds interesting, yet it requires your patience and care. Before you get into the specifics, let me say that these vehicles have independent infotainment systems. Also, the software update process may involve more than one truck mechanism. Here are the simple steps.

  • Contact customer care for available updates.
  • Keep a compatible USB ready before you undergo the procedure.
  • Download the updated software from the manufacturer’s website.
  • Now transfer the update setup to your USB.
  • Place the truck in an unoccupied place, and switch it on by putting the key in the ignition without starting the engine.
  • Insert the USB into the port.
  • Start the procedure and wait patiently.
  • Remove the USB once the software is updated and check for the update through settings.

Here are some useful, tricky tips to help you get through this safely and successfully. 

  1. Follow the instructions carefully to format the USB
  2. Use a compatible USB. Make sure you download the correct update according to the camera model.
  3. Make sure the file on the USB is downloaded to the correct location.
  4. Park your vehicle in a safe place where you will not need to move it for quite some time.
  5. Follow any add-on information from the manufacturer’s desk.
  6. Lastly, be model specific, be patient, and be careful.

Frequently Asked Questions (FAQs): 

How to reset the backup camera by using gear?

It is easy to reset the backup camera by using the camera. Follow the simple steps below and reset in a couple of minutes.
. Open the hood of your car.
. Turn on the headlights.
. Engage the reverse gear.
. While in reverse, check if the backup camera is activated and functioning properly.

How can I know the location of the wiring for the backup camera? 

To locate the wiring of a backup camera, follow these steps:
01. Consult the vehicle’s manual to determine the recommended installation location.
02. First, identify the camera’s connection point on the vehicle’s rear.
03. Then Trace the camera’s wiring from the connection point to the vehicle’s interior.
04. Next, remove interior panels if necessary to access the wiring.
05. Use a wire tracker or multimeter to identify the camera’s wiring among the vehicle’s harnesses.

 Is there a recall on ford f150 backup cameras

Yes, there is a recall on Ford F-150 backup cameras. The recall cover is also included on 2020-2023 Ford Explorers and Lincoln Aviators. All of these are equipped with 360-degree cameras.

Why has my150 backup camera screen turned black?

The backup camera screen may have turned black due to a malfunction in the camera itself, a faulty fuse, a loose connection, or a software issue. However, if you still experience the issue, contact a professional or customer care to fix it.


The f150 backup camera can have various issues, either hard-core or soft-core. All you need to do is be patient with the issue and look for the instructions in the manual or on the manufacturer’s desk. 

For every solution you go for, follow the instructions strictly; if the problem persists, contact customer care immediately. Remember, the updates are always there; the more you update, the more your camera stays friendly.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *