Hey there! This post contains affiliate links to products. We may receive a commission for purchases made through these links. But it never influences our product selection process.
While some may claim the Ram 1500 has lifetime fluid, changing it before reaching 100,000 miles is recommended, especially if you engage in heavy towing. The transmission fluid change process on Ram 1500 is straightforward if you follow the correct instructions.
Gather all necessary tools and materials and lift your vehicle’s rear end. Drain the entire old fluid from the drain and replace the filter. After that, reinstall the new pan and fill the transmission fluid up to the recommended level. Once filled, lower the vehicle.
I will cover the fluid change, filter replacement, and the necessary tools you’ll need. Let’s dive in and ensure your transmission stays in excellent condition.
Ram 1500 Transmission Fluid Type
For the Ram 1500 model years 2013-2023, the recommended transmission fluid type is ATF+4. ATF+4 is a specially formulated fluid designed for automatic transmission systems.
It offers excellent protection against wear, corrosion, and oxidation, ensuring smooth shifting and optimal performance of the transmission. It’s advanced additives and synthetic base ensure durability and compatibility with the Ram 1500’s transmission system.
Uh, you want to change your Chrysler 300 transmission fluid but do not know how to do it? No worries, here is the solution: Chrysler 300 transmission fluid change
Ram 1500 Transmission Fluid Capacity:
The transmission fluid capacity of a Ram 1500 model manufactured between 2013 and 2023 is approximately 8.0 quarts. It is important to ensure that the transmission fluid is at the correct level for optimal performance and longevity of the vehicle’s transmission system.
If you need help changing the fluid in your Acura transmission, you must click on this link: Acura transmission fluid change guide.
Ram 1500 Transmission Fluid Chart:
| Model Year | Transmission type | Transmission Fluid Capacity | Transmission Fluid Type |
| 2013-2014 | 6 Speed Automatic | 8.0 Qtz | ATF+4 |
| 2014-2023 | 8 Speed Automatic | 8.0 Qtz | ATF+4 |
Ram 1500 Transmission Fluid Check
- Start your Ram 1500 and allow the engine to warm up.
- Locate the transmission fluid dipstick in your Ram 1500.
- Now, Pull out the dipstick. Once pulled out, insert and touch the fluid with your fingers.
- Use a clean rag to wipe off the dipstick and insert it back into the dipstick tube.
- If the fluid level is low, use a funnel to add transmission fluid.
- Ensure the fluid is appropriate, as indicated on the dipstick.
Note: Is your fuel pump faulty when cold? Do not frustrate yourself; read this guide to resolve the issue: Fuel pump not working when cold
How Often to Change Transmission Fluid Ram 1500?
Transmission fluid in a Ram 1500 should be changed every 50,000 to 100,000 miles, particularly for automatic transmissions. Regularly checking fluid levels with a dipstick is crucial, similar to oil maintenance.
By changing the transmission fluid, you can maintain the performance of your Kia Optima. For help this article: Kia Optima transmission fluid change guide
Ram 1500 Transmission Fluid Change [Easy Step-by-Step Guide]
Step 1: Arrange The Necessary Tools and Parts
Gather all the required tools and parts before starting the transmission fluid change on your Ram 1500. You will need the following tools and materials to complete the transmission fluid change task.
- Transmission fluid (Valvoline Type F (ATF) Automatic Transmission Fluid)
- Transmission filter and gasket (Dorman brand is recommended)
- 10mm hex tool
- Drain pan
- Fluid transfer pump.
Step 2: Raise Vehicle’s Rear End of The Vehicle
To ensure proper draining and filling of the transmission, raise the rear end of your Ram 1500. It will help level the transmission during the fluid change process. It is essential to have the rear end higher than the front.
Step 3: Drain The Old Transmission Fluid
Find out the drain plug on the transmission and remove it using the 10mm hex tool. Allow the fluid to drain completely into the drain pan. It is advisable to remove the fill plug to prevent any potential issues.
Step 4: Remove The Transmission Pan
Using a T40 Torx tool, loosen and remove all the bolts securing the transmission pan. Carefully lower the pan once all bolts are removed, and allow any remaining fluid to drain. Be cautious, as the fluid may still be hot.
Step 5: Replace The Transmission Filter
Now check the old filter and compare it to the new one. Ensure you have taken the same. Remove the old filter from the pan, and if necessary, use a clean cloth to wipe the mating surface. Install the new filter securely in place.
Step 6: Install The New Transmission Pan
Clean the pan thoroughly, including the mating surface. Carefully position the pan back onto the transmission, ensuring a proper fit. Begin tightening the bolts by hand, then torque them down to specification using the appropriate torque settings.
Step 7: Refill The Transmission Fluid
Locate the fill plug on the side of the transmission and remove it using the 8mm Allen tool. Attach the fluid transfer pump to the transmission fluid bottle and insert the pump nozzle into the fill hole. Slowly pump the fluid into the transmission until it reaches the correct level. Refer to the owner’s manual for the recommended fluid capacity.
Step 8: Reinstall The Fill Plug and Lower The Vehicle
Once the transmission is filled to the proper level, reinstall the fill plug and ensure it is securely tightened. Carefully lower the rear end of the vehicle to its normal position.
If you have time, visit here: 5-7 hemi oil pressure problems. It may help you enjoy a smooth driving experience.
Ram 1500 Transmission Fluid Change Costs
You may see variations depending on your transmission fluid brand and other factors. However, the average cost of a Ram 1500 transmission fluid change typically ranges from $183 to $210. Labor expenses are around $104 to $132, while parts cost approximately $79.
Changing GMC Sierra transmission fluid will be a lot simpler if you visit this article: GMC Sierra transmission fluid change
Frequently Asked Questions (FAQs):
How to repair a Ram 1500 transmission fluid leak?
01. Park the vehicle on a flat surface and engage the parking brake.
02. Locate the source of the transmission fluid leak.
03. Clean the affected area thoroughly to ensure accurate identification of the leak.
04. Depending on the severity of the leak, repair options may include replacing seals, gaskets, or damaged components.
05. Once done, refill the fluid and ensure no leak is found
Where is the location of the Ram 1500 transmission fluid dipstick?
The Ram 1500’s transmission fluid dipstick can be found near the rear of the engine bay, usually on the passenger side. However, Refer to the vehicle’s manual for a specific model to know the exact details about the transmission fluid dipstick on your available Ram 1500 model.
What is the Ram 1500 8-speed transmission temperature?
The recommended temperature range for the 8-speed transmission in a Ram 1500 is generally between 70°C and 100°C (158°F and 212°F). To get maximum performance, try to maintain that temperature.
Should I replace the Ram 1500 8-speed transmission filter when changing the transmission fluid?
Yes, it is recommended to replace the Ram 1500 8-speed transmission filter when changing transmission fluid to ensure excellent performance and prevent potential issues. However, if the filter is in good condition, you can use it after cleaning.
Conclusion
Changing the transmission fluid in Ram 1500 is not a very complex job. But it needs care and attention to change transmission fluid perfectly. Otherwise, you will not get the expected performance from your vehicle.
So, before starting the job, read the instructions carefully and ensure you have all the required tools and materials to complete the job completely.
