Hey there! This post contains affiliate links to products. We may receive a commission for purchases made through these links. But it never influences our product selection process.

Honda Civic distributor ensures high voltage from the ignition coil to spark plugs for igniting the fuel mixture to run the engine. But it may happen that you are experiencing Honda Civic distributor issues. for many reasons. However, you can fix Honda Civic distributor problems if you have auto-troubleshooting knowledge. 

How to fix distributor problems? Faulty distributor caps and rotors are the major issues for distributor problems. You may need their replacement to fix the problem. However, other problems such as ignition coil, moisture, and corrosion can cause this issue. Also, check for them if the issue is not resolved.

Read on to learn the symptoms and causes and fix each case for Honda Civic distributor. 

Symptoms of Honda Civic Distributor Problems

Symptoms of Honda Civic Distributor Problems
Detect issues early! Spot symptoms of Honda Civic distributor problems. Don’t let car troubles surprise you—stay informed for a smooth ride.

You may notice different symptoms when have a problem with your car’s distributor. Here are a few significant symptoms that may alert you to check the distributor in your car.

  • Engine misfires, especially when accelerating
  • Problems in starting car
  • Check engine light illuminating
  • Exercise or unusual engine noises when accelerating

If you are looking for a solution to TPS problems, here is the solution for you: Honda Civic throttle position sensor problems.

Causes of Honda Civic Distributor Problems

If you have a problem with your Honda Civic distributor, you may be experiencing that issue due to the below reasons.

  • Worn Distributor Cap
  • Faulty Distributor Rotor
  • Ignition Coil Issues
  • Moisture or Water Intrusion
  • Corrosion and Rust

Do automatic transmissions have problems? Visit this link to find the solution: Honda Civic automatic transmission not shifting.

Honda Civic Distributor Problems by Model Year

Honda Civic Distributor Problems
Learn about Honda Civic distributor problems for a hiccup-free drive. Simple tips for a stress-free car journey.

1996 Honda Civic:

A bad distributor on the 1996 Honda Civic can cause the below issues.

  • Bad Ignition Coil
  • Faulty Spark Plugs
  • Bad distributor relay
  • Malfunctioned fuse

Solution:

  • First, check the ignition coil for damage; if the coil is faulty, arrange for its replacement.
  • Next, check the spark plugs and ensure they are sparking correctly. If found, faulty spark plugs must be replaced.
  • Also, check the distributor relay in the fuse box and ensure it is okay. If the relay is faulty, replace it.
  • Finally, locate the fuse for the distributor in the fuse box and check for damage. If it needs replacement, replace it with a compatible fuse.
  • Now, start the engine and check the distributor’s performance. Make sure there is no issue.

Fix your Honda Accord ignition switch issues from here: Honda Accord ignition switch problems and solutions.

1997 Honda Civic:

Your Honda Civic 1997 may have distributor problems for the following reasons.

  • Ignition timing is off
  • Faulty ignition control module
  • Wiring plug issues
  • Ignition cylinder issues

Solution:

  • Check for the ignition timing; if there is wrong timing, you may also face distributor problems. For timing correction, you will need a timing light. I recommend the Teen Dream Ignition Timing Light for your Honda Civic. Adjust the timing at the correct level. For the correct level, check the vehicle’s user manual.
  • Next, check for the ignition control module; if there are issues, replace the ignition control module to fix the issue.
  • Also, inspect for loose connections or broken wires in the ignition switch; if the wires are broken, repair or replace them. But if you see the connections are loose, tighten them.
  • The ignition switch cylinder lets you turn the key to start the engine. If it is broken, you may fail to start the engine or supply power to the distributor. Check for it; if the cylinder is damaged, you must replace it. 
  • Once done, check the distributor’s performance and ensure the problem is resolved.

If your Honda Civic Bluetooth not working, it may help you: Honda Civic Bluetooth not working.

1998 Honda Civic:

In the 1998 Honda Civic, you may experience distributor problems for the below problems.

  • Faulty distributor
  • Broken sensors
  • Bad Igniter
  • Low battery

Solution:

  • First, check with the distributor and ensure it is okay. If the distributor is broken, replace it with a new one.
  • Next, check for the bad sensors dealing with the distributor and check for the faulty sensor in the fuse box. Replace the faulty sensors.
  • A bad igniter may also be the cause, so check for igniter issues. If it needs replacement, replace it.
  • A low battery can be the culprit. Check your Honda Civic battery voltage using a multimeter. For easy and accurate measurement, I recommend the Innova digital multimeter. Check and ensure the voltage is okay; if the battery is dead, you must replace it.

1999 Honda Civic:

In the 1999 Honda Civic, below are some common issues that may make your distributor stop working.

  • Ignition coil
  • Faulty Spark plug
  • Distributor fuse
  • Dirt in the ignition cylinder

Solution:

  • The ignition coil is a common cause of 1999 Honda Civic distributor issues. Check the ignition coil. If the coil is damaged, replace it.
  • Next, check for the spark plugs and ensure they are okay to provide an excellent spark to start the engine. If the spark plugs are bad, replace them.
  • Also, check for the distributor fuse in the box and replace it if needed.
  • Finally, check for dirt in the ignition cylinder; dirt may also restrict the key from turning. If there is dirt, clean it and then try the key. Make sure issues are fixed and the distributor is working fine.

2000 Honda Civic:

Following are some of the most reported issues that may cause distributor problems with the 2000 Honda Civic.

  • Faulty Crank position sensors 
  • Distributor fuse issues
  • Cam sensor problems
  • Ignition Switch problems

Solution:

  • Check for the Crank position sensors and ensure they are okay. If the sensors are faulty, replace them with compatible sensors.
  • Then check for the distributor fuse, and if needed, replace it.
  • Check for the cam sensors and ensure they are working fine. If they are faulty, replace them.
  • Finally, inspect for ignition switch issues and make sure there are no broken or damaged parts. If necessary, replace or repair them.
  • Check and ensure the distributor is working correctly and the issue has been fixed.

Fix the door lock issues on your Honda Civic after reading this blog: Honda Civic door lock problems and solutions.

Honda Civic Distributor Replacement

Replacing the Honda Civic distributor may become easier if you follow the steps below.

  • First, disconnect the battery to ensure safe operation.
  • Then, access the distributor and remove its cap and rotor. But note their position because you will need to put them back.
  • Next, unbolt and remove the distributor and set it aside.
  • Take the new distributor. I recommend JDMON Compatible with Ignition Distributor Honda Civic.  Install it in the same position and ensure the bolts are tight.
  • Reconnect the cap and rotor and then the battery
  • Now, check the distributor and ensure the problem is fixed.

Honda Civic Distributor Cap and Rotor Replacement

Replacing the distributor cap and rotor is a simple task. Follow the steps below and replace them worry-free.

  • Switch off the engine and let it cool
  • Disconnect the battery
  • Locate the distributor on your Honda Civic engine
  • You will see the cap and rotor on the distributor
  • Take a screwdriver and remove the cap and rotor screws
  • Once the screws are removed, remove the cap and rotor.
  • Now, mount the new cap and rotor in the same place.
  • Reconnect the screws and then the battery
  • Check the distributor’s performance to ensure you have done the right job.

Honda Civic No Spark New Distributor

If you have replaced the new distributor but are still facing the issue, you may experience no spark. There can be several issues, such as wiring, ignition coil, or faulty distributor.

Solution:

  • Make sure there are no loose connections or broken wires in the ignition or distributor wires and connections. If connections are loose, tighten them, but if wires are broken, replace them.
  • Then, check for the ignition coil and ensure it is working. If needed, replace the ignition coil.
  • Finally, check for the distributor and ensure it is okay; you may have a problem with it. If it is faulty, you must replace it or claim its replacement.

Frequently Asked Questions (FAQs):

How does a distributor cap work?

The distributor cap is an essential part of the distributor that distributes the electricity from the ignition coil to the spark plug to start the engine. It ensures the correct timing of the combustion to run the engine smoothly.

What are the signs of a faulty distributor cap?

If you have a faulty distributor cap, you may experience the following signs.
01. Reduced fuel economy
02. Uneven performance of the engine at idle
03. Sudden shutdown of the engine
04. Carbon buildup, corrosion, and cracks on the distributor cap
05. Engine misfires when accelerating

What happens when your distributor cap goes bad?

If the distributor cap becomes faulty, it may disrupt the car’s ignition system. You may experience poor engine performance, stalling, problems with engine start, and engine misfires. It needs immediate fixation to get rid of the issue.

What is the 2007 Honda Civic distributor cap location?

The Honda Civic distributor cap is located on the distributor itself. Check for the engine compartment on the front side of the engine. You will see the distributor cap. It is mounted with screws on the distributor’s top near the rotor.

Conclusion:

Fixing distributor problems is essential because it disturbs your engine performance and may cause heavy expenses if not dealt with. 

When you experience that issue, try to find its cause; once you identify the cause, fix it by following the above instructions. Before running on the road, make sure the distributor issues have been fixed.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *